 Altek Calibrators
Ametek Dry Block Calibrators
Beta Pressure Calibrators
Emerson Hart Field Communicators
Hart Scientific Dry Block Calibrators
Martel Calibrators
Meriam Communicators and Manometers
ProCalV5 Calibration Management Software
WE ALSO REPAIR AND CALIBRATE
ALTEK PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
Altek 334 Loop Calibrator
Features:
- All 4 to 20 mA Loop Functions -
Source 0.00 to 24.00 mA or -25.0 to 125.0% read mA or percent to 52.00 mA, simulate 2-wire transmitters, measure -99.99 to 99.99 volts DC power & read 2-wire transmitters.
- Quik-Chek Switch –
Select 4 or 20 mA output or 2-wire simulation. Accurate to ±0.006 mA.
- Full Range 10 Micro amp Resolution -
Adjust 4 digit display to ±0.05% without range change.
- Long Battery Life -
3x9 volt alkaline batteries source 20 mA for over 20 hours, 12 mA for over 33 hours; 2-wire simulate and read for 150 hours. Much longer than NiCd batteries or calibrators with a single 9 V battery!
- Drive Capability -
1200 Ohms with current limited, fuse-less protection to 135 V AC/DC .
Altek 820
TechChek Multifunction Process Calibrators
Features:
- Functions Like a Calibrator
Milliamps, Voltage, RTD, T/C & Frequency.
- Measures Like a Multimeter
Measure AC/DC Volts, Ohms & Continuity.
- Digital Accuracy with Analog Simplicity
Speed sensitive digital pot for fast adjustment.
- Typical Accuracy to ±0.025%
Accurate to 0.02 mA, V or Hz, 1¡C, & 0.3 Ohms.
Reads & Sources Standard Process Signals -
¡C, ¡F, mA, % 4 to 20, V, mV, Ohms, Hz & CPM.
- Easy-to-Use
Simple, menu-less operation.
- User Settable Quik-Chek Switch
Set any Span and Zero.
- Minimum & Maximum Tracking
Instantly recall the highest & lowest measurements.
- Standard AA Alkaline Batteries
Long battery life with quick battery changes.
top
WE ALSO REPAIR AND CALIBRATE
AMETEK PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
 Ametek ITC 320 Dry Block Calibrator
Features
- Dual-zone heating block
- Interchangeable inserts
- Multi-hole insertion tubes
- MVI Mains Variance Immunity
- Automatic switch test
- RS232 and JOFRACAL calibration software
- Multi information display
- Safety banana bushings
- Auto stepping
- Stability indicator
- Count down timer (shows when unit is stable)
- Programmable maximum temperature
- Fast simulation/training mode
-
- Re-calibration from keyboard
top
WE ALSO REPAIR AND CALIBRATE
BETA PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
 Beta Gauge 321 Temperature Pressure Calibrator
Dual sensor, triple display temperature pressure calibrator. The new standard of custody transfer applications.
Features:
- Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
- Temperature-compensation ensures accuracy in field applications
- External pressure module connection supports all BETA Port-P pressure modules (25 ranges) for even more measurement capability
- Measure 4-20 mA input
- Measure up to 30 V DC
- Large graphic style LCD with backlight
- Switch test on pressure 1, pressure 2 or external pressure module
- Operating mode layers support simple measurements to complex applications
- Up to five frequently used setups to be stored; last setup automatically recalled on power-up
- % Error and damping functions
top
Emerson Hart Field Communicators
|
|
Emerson Hart 375 Field Communicator |
Emerson Hart 275 Field Communicator |
- Touch-screen display
- Large physical navigation buttons
- Comfortable one-handed operation in the field
- Plenty of memory to allow for future expansion
- Configuration Expansion Module holds hundreds of device configurations and it is externally accessible
- Enhancements in the battery pack allow a full recharge in 2 hours
- Easy Upgrade Keeps Your Communicator Current
- User upgradeable via the Internet
- Intrinsically safe
- Rugged and reliable
|
|
top
WE ALSO REPAIR AND CALIBRATE
HART SCIENTIFIC PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
 Hart Scientific 9141 Field Dry Well Temperature Calibrator
Features:
- Lightweight and very portable
- Accuracy to ±0.25 °C
- RS-232 and Interface-it software included
- Easy to recalibrate
top
WE ALSO REPAIR AND CALIBRATE
MARTEL PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
 Martel MC1200 Multifunction Calibrator
Features:
- M easure and source T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency; source pulse trains
- Isolated mA/V read-back circuit for complete transmitter calibration
- Communication port compatible with both Fluke 700 Series and Beta Calibrator pressure modules
- Built-in 24V supply can drive 4-20 mA lops up to 1000 Ohms
- Direct entry of custom RTD coefficients (Ro, A, B, C)
- All source modes can be programmed with dedicated set points to speed calibration and linearity tests
- Highest accuracy in class to 0.015% of reading
- Meets CE requirements and is designed to IEC 1010 safety standards
- Supplied in full rubber boot; optional carrying case available
 Martel 3001 Precision Calibrator
Features:
The Martel 3001 precision calibrator combines the power and features of the M2001 (voltage, current, TC, RTD and pressure) with a second completely isolated measurement channel for a single laboratory calibration instrument unmatched in versatility, performance, and value. As with every Martel calibrator, the 3001’s world-class performance and features are accessed through a very simple-to-use, intuitive user interface. The Martel 3001 is truly a “process calibration laboratory in a box.”
- Superior calibration accuracy to 0.0025% of reading
- Direct keyboard entry or cursor entry with decade control
- Source/Read thermocouple (13), RTD (9), Voltage, Current, Pressure (read only)
- Custom RTD and SPRT profiles
- Nine (9) setpoints for each output range and type
- Beryllium-Copper binding posts reduce thermal EMFs
- RS232, USB and IEEE-488 remote control
- Compatible with Fluke Met/Cal® software
- Isolated measurement channel
- Two (2) voltage ranges: 10V and 100 V DC
- MilliAmp range 0 to 52 mA
- MilliAmp range with simultaneous 24 VDC power
- Selectable 250 Ohm HART™ resistor
- Accuracy of 0.005% of reading on voltage ranges
top
 Meriam 4100 HART ® Communicator
Precision Instruments for Pressure, Flow, Temperature and Level
Features:
- Communications 15 seconds after “On”
- 26 hour battery life
- Full alphanumeric keypad
- Backlit, 13-line, pixel graphic display
- Edit directly from Review / Edit mode
- Clone / Upload / Download configurations
- Numbered HART menus for quick selection
- Soft & thumb operated Up, Dn, Select keys
- Great ergonomics for comfort &ease of use
- Fitted, use-in-place, carrying case w/strap
- 9-volt battery or AC adapter power
- HART lead kit included
Meriam Smart Manometer
|
|
|
350 Smart Manometer Series
Precision Instruments for Pressure, Flow, Temperature and Level |
35 Series Digital Manometer
Precision Instruments for Pressure, Flow, Temperature and Level |
M2 Series Smart Manometers
Precision Measurement Without a Premium Price |
- Portable electronic manometer
- Single Pressure Sensor
- ± 0.025% FS traceable to NIST
- Full temperature compensation from 23° to 122° F
- Pressure ranges: vacuum to 2000 PSI
- Differential, vacuum, gauge and absolute pressure sensors available
- Min / Max, Hold, Damping features
|
- One model for pressure, vacuum or differential pressure
- One model for absolute pressure
- Zero adjust thumb wheel knob
- Pressure ranges: 20" wc to 100 PSI
- ± 0.25% of Reading ± 5 counts
- Small size (3.18"w x 6.47"l x 1.17"d)
|
- Portable electronic manometer
- ATEX Intrinsic Safety available
- Single pressure sensor
- ± 0.025% FS traceable to NIST
- Full temperature compensation from 23° to 122° F
- Superior stability
- Pressure ranges: vacuum to 2000 PSI
- Differential, vacuum, gauge and absolute pressure sensors available
- Data Logging Mode
- Timed Leak Test Mode
- Min/Max, Hold, Damping features
- Small size (3.18"w x 6.47"l x 1.17"d)
|
top
WE ALSO REPAIR AND CALIBRATE
THERMOPROBE PRODUCTS! CLICK HERE TO REQUEST A QUOTE.
 The TL-1A thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.
The TL-1A is our latest stem thermometer. It is an improved version of the original ThermoProbe model TL-1. The TL-1A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL-1A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.
4 Point NIST Traceable Calibration and a one year warranty included.
top
ProCalV5 - Professional Calibration Management Software.
- A real-time paperless calibration software solution.
- Maximize performance, improve quality, assure timely reporting
- Ensures your quality system is under control.
- Designed to satisfy the strictest of compliance requirements
- 21 CFR Part 11
- ISO 9000-2001
- QS 9000
- ISO 17025
- ANSI 254
- and many others....
For more information regarding our calibrators, communicators and software, please contact JM Test Systems at 800-353-3411 or email us at jmsales@jmtest.com.
top |